• Inside Corner - Stop at Corner

    1/2” thick acoustical fabric panels.

    The 1/2" thick acoustical panels achieve a 0.50 NRC Rating. a standard semi-rigid fiberglass as the core material.

    1/2" thick high tackable fabric panels.

    The 1/2" thick high-tackable panels are used in areas where a highly tackable fabric panel is required. These panels use a 24 PCF density USG mineral board as the core material.

  • Outside Corner - Stop at Corner

    1/2” thick acoustical fabric panels.

    The 1/2" thick acoustical panels achieve a 0.50 NRC Rating. a standard semi-rigid fiberglass as the core material.

    1/2" thick high tackable fabric panels.

    The 1/2" thick high-tackable panels are used in areas where a highly tackable fabric panel is required. These panels use a 24 PCF density USG mineral board as the core material.

  • Square-Edge-Profiles---1_2-Size---Base-Detail---Vinyl-Base

    1/2” thick acoustical fabric panels.

    The 1/2" thick acoustical panels achieve a 0.50 NRC Rating. a standard semi-rigid fiberglass as the core material.

    1/2" thick high tackable fabric panels.

    The 1/2" thick high-tackable panels are used in areas where a highly tackable fabric panel is required. These panels use a 24 PCF density USG mineral board as the core material.

  • Square-Edge-Profiles---1_2-Size---Midwall-Detail---Butt-Joint

    1/2” thick acoustical fabric panels.

    The 1/2" thick acoustical panels achieve a 0.50 NRC Rating. a standard semi-rigid fiberglass as the core material.

    1/2" thick high tackable fabric panels.

    The 1/2" thick high-tackable panels are used in areas where a highly tackable fabric panel is required. These panels use a 24 PCF density USG mineral board as the core material.

  • Square-Edge-Profiles---1_2-Size---Ceiling-Detail---Flush

    1/2” thick acoustical fabric panels.

    The 1/2" thick acoustical panels achieve a 0.50 NRC Rating. a standard semi-rigid fiberglass as the core material.

    1/2" thick high tackable fabric panels.

    The 1/2" thick high-tackable panels are used in areas where a highly tackable fabric panel is required. These panels use a 24 PCF density USG mineral board as the core material.